Watercolour Glass

Watercolour Glass Dish

I've got a new glass design to add to my collections.

Watercolour Glass has been a bit of an experiment, using up tinted glass cullet placed slightly randomly and decorated with coloured glass "blobs".  After the second firing I painted tiny gold stars and then refired at a lower temperature. The tinted glass is 3mm thick (I usually use 2mm Bullseye glass) and so the dish is slightly chunkier and heavier. 

I am very pleased with the results so I am planning to make more dishes in different sizes (this one is 30cm).  Tinted glass is more expensive than 2mm transparent glass so it does push the price of making it up - particularly if I use my favourite colour, Rhubarb, which is a pinkish-greyish colour.  This is because pink/red glass has a gold content which creates the colour. 

But I haven't forgotten about the weaving..... 

Glass Dishes Workshop

On Saturday 7th November I will be teaching Glass Dishes at The Garth at Skipwith Common, just outside York.  Here is a bit more information about it.

Enjoy a day designing and making a trio of fused glass dishes including trinket dish, curved dish and square dish (13cm square).  Experiment with opal and transparent colour glass, add inclusions such as mica and copper to create sparkle. Stunning results and lots of fun.  No previous experience of glass cutting necessary.  Fees: £80

If you would like to book a place on this one day workshop please click on the link HERE which will take you to Silver and Stone where you can book your place. Any questions about the workshop (or future workshops) please email me HERE

Tealights or trinket dish

Create Your Own Glass

Fused glass platter

Have you ever wanted to make your own fused glass platter, dish or wall piece? I offer individual tuition at my studio in Silsden, West Yorkshire to enable you to make a stunning piece of glass to your own design. 

Glass plate after the first firing

I design, cut and clean all my glass prior to placing it on the kiln shelf for fusing. Most of my glass goes through 2 days of kiln firing (coasters up to four) to achieve the finish that I like - a slightly raised design but all edges are well rounded.

Glass plate on platter slump mould

Once the glass is fully fired it is washed to remove any resideue of kiln wash and then placed onto a ceramic slump mould. The piece is then fired at a lower and slower rate so that it slumps down into the mould and takes the shape of the platter. This is always the exciting bit - opening the kiln to see the finished dish. Some glass fusers will grind the edges of the dish and refire it to "polish" the edges but if your firing schedule is slow enough this isn't necessary.

Slumped platter stll in the mould

If you would like to visit the Glassprimitif studio and make a large glass platter or wall piece you can contact me HERE. No previous experience of glass fusing is necessary and all materials are provided and refreshments too (but bring a packed lunch).

£150 full day - 10am to 5pm