You win some, You lose some...

In a previous post, Float Glass Products, I raved about the exciting new stuff I had bought that is COE82, making it compatible with float. Whilst the colors of float glass are disappointing (compared to the vibrancy of Bullseye glass) I had high hopes that these products would help me to make new, innovative glass designs at a fraction of the cost of COE90 glass. Here's what has happened so far...



Clear bubble powder: I was hoping for large, blistering bubbles such as the ones I get in my sushi dishes but the bubbles came out more like a rash. Unperturbed, I made another tile with lots more bubble powder (see below). If you look carefully you wlil see that the larger bubbles have stress fractures in them.



Below: clear bubble powder experiments with other bubble powders.
Curious! The one of the left is clear and turquoise bubble powder. The clear powder appears to have stripped the turquoise of any color, leaving it a dirty gray. The one on the right is clear bubble powder mixed with red bubble powder. It has also stripped the red color from the bubbles. I'm blaming the clear powder but, as I am still experimenting with this, I could be wrong.



Below: bubble powder stud earrings with clear and pink bubble powder. You can see a faint sheen of pink around the bubbles. They do look unusual in the fact that the bubbles look as if the glass is under water but, as I am an "in-yer-face" with color kind of gal, I will be working on this to make it more colorful.



Transparent frit: because colored float is slightly disappointing I was expecting the frit to be a bit wishy washy. Instead, I am quite pleased with the results.
From left to right: First one is frit mixed with clear bubble powder. again, it's turned a horrible grayish color, like burnt ash.
Second one is amber, orange and red frit between two pieces of float glass. It looks quite good close up because it has tiny air bubbles trapped inside.
Third and fourth ones are both frit placed between and on top of the glass. The image doesn't show it clearly but these pieces have a lot more depth and color to them.



Below: amber, orange and red frit earrings. The transparency makes them look almost liquid. I'm quite pleased with these and they are available for sale in my Dawanda shop.



Silver and gold glass sheet: this glass has a coating of gold or silver and it has lots of pre-made scratches that make a pattern on the glass. (It would be good to be able to buy it as a solid metallic color too). Here's what I did with it.



Below: various glass nuggets fused with gold and silver coated glass. The ones on the left have been fused with a cap of clear glass. The gold and silver coating has burned out and the glass cap has devitrified. Not good! The ones on the right have been fused with the gold ands silver coated glass on top of the clear glass. Although it looks much better I didn't get the shrinkage in the kiln that I was expecting so I have since cut the glass shapes to a smaller size.



Hearts of Glass. These glass hearts have been hand cut and fused by me, Glassprimitif. They are made from float glass (coe82) with a coating of gold or silver glass. Each one measures 1.5" (3cm) and are available for sale at Glassprimitif on Etsy.